OF5F / OF5L
Preparing the OF5 for operation
Preparing the OF5 for operation
Consult and observe the following chapter in order to prepare the OF5 for operation.
Inserting the filter element
The unit has no filter element installed upon delivery from the factory. Prior to start
up, check to see whether a filter element is contained in the filter housing.
Information on changing a filter element can be found on page 26.
Hanging / connecting the suction hose
NOTICE
Severe contamination
The unit will be destroyed
►
Do not prime directly at the bottom of the tank (in the sump).
The greatest contamination is found on the bottom of the tank. All
impurities and other particles are deposited on the bottom of the tank.
Pull the suction hose (thick hose) with lance out of the mounting in the floor plate.
Put the suction hose with lance, without tension and or twist, into the appropriate
container and secure it.
Hanging / connecting the pressure hose
Pull out the pressure hose (thin hose) with lance from the mounting in the floor plate
and insert it in the appropriate receptacle.
Put the pressure hose with lance, without tension and or twist, into the appropriate
container and secure it.
To prevent air from entering the medium, make sure that the pressure
hose with lance is always below the oil level in operation.
HYDAC FILTER SYSTEMS GMBH
en(us)
Page 17 / 36
BeWa OF5 F_L 3160337e en-us 2011-01-17.doc
2011-01-17
