CSM 2000 Series
Adjusting the counter balance valve
2.
Unscrew the manometer onto the
test point (1).
3.
Switch the CSM on.
4.
Check the suction intake behavior
of the pump and the oil flow.
5.
If a uniform volume flow can be
detected on the basis of the sound
the pump is making and/or at the
outlet side (OUT), then rotate
throttle valve gauge (B) in clockwise
direction until it is completely
closed.
6.
The pressure gauge at the test point
(1) shows the pressure at the inlet
of the ContaminationSensor
CS2000 (max. 30 bar).
7.
Unscrew the head-nut from the
counter balance valve (A)
.
HYDAC FILTER SYSTEMS GMBH
en(us)
Page 28 / 40
BeWa CSM2000 3211683h en-us 2011-12-01.doc
2011-12-01
