HYDAC FILTER SYSTEMS MFU-10P9S Series, Инструкция по эксплуатации и техническому обслуживанию

Страница: 89 / 124

HYDAC FILTER SYSTEMS GMBH Performing Maintenance | 9
BeWa MFU-10P 4391553b en-us 89 / 124
2. Remove the suction and pressure lances from the con-
tainer and empty them.
3. Release the collet (952) on the quick coupling (951) by
hand in the anti-clockwise direction.
4. Turn the quick coupling (951) by ≈ 90° anti-clockwise
and remove it.
ð
The Seal ring and the strainer behind it are now visible
and accessible.
O Disassembly of the suction hose is complete.
For installation, proceed as follows:
5. Attach the quick coupling (951) to the mating piece on
the filter unit (700) and rotate the quick coupling (952) by
≈ 90° in clockwise direction.
6. NOTICE! If the collet is not or not adequately tight-
ened, the pump will draw air through the quick cou-
pling.
Pull the collet (952) at the quick coupling (951) by hand
in the clockwise direction.
7. Put the filter unit into operation and check the filter unit
for leaks.
O
The assembly of the suction hose is complete.
1
2
3
4
5
6
7
8
9
10
A