HYDAC FILTER SYSTEMS FCU1315, Инструкция по эксплуатации и техническому обслуживанию

Страница: 92 / 185

7 | HYDAC FILTER SYSTEMS
82 / BeWa FCU1315 4168086b
See also
!
Putting the FCU into operation [
}
41]
2. Measuring up to max. 45 bar / 650 psi with
hydraulic fluids
For the measurement of permissible hydraulic fluids up to a
maximum of 45 bar / 650 psi, proceed as follows:
u
The system must be depressurized before performing any
work on the product.
u
If the pressurized connection is connected to the hydraulic
system, hydraulic fluid will flow through the FCU.
u
Make sure that the specified sequence is followed.
u
Never seal the connection OUTLET.
u
Put the free end of the OUTLET return hose into an un-
pressurized container.
u
When operating, always observe the permissible operating
pressure.
Required hoses: -Return hose
-High-pressure hose
NOTICE
If the operating pressure exceeds 45 bar / 650 psi
The excess pressure will be discharged via port OUTLET