HYDAC FILTER SYSTEMS FAM 5, Руководство по эксплуатации

Страница: 17 / 20

HYDAC FILTER SYSTEMS GMBH Setting the configuration | 6
BA FAM5 replace adjust the control and display 4639760 en-us web 17 / 20
6 Setting the configuration
After changing the PLC and TDE components, the optional
configuration of the unit, e.g. additional sensors or equipment,
must be set.
The optional sensor system/equipment can be identified, for
example, by the type code of the unit.
Sensor system/equip-
ment Description
AS1000 detected AquaSensor AS1000 detected:
FAM-5-x-x-x-xx-x-x-S-A/AC/ACS-x
CS1000 detected ContaminationSensor CS 1000 de-
tected:
FAM-5-x-x-x-xx-x-x-S-AC/ACS-x
Heater detected Heater detected: FAM-5-x-x-x-xx-x-
H-S-x-x
Tab. 2: Optional sensor system/equipment
The individual components can have the following statuses:
Status Description
OFF Inactive/not detected
ON Active/detected
Opening the configuration menu
Press button and or simultaneously.
Leaving the configuration menu
Press button and simultaneously.
Setting the configuration
To set the configuration proceed as follows:
ü The switch cabinet is closed.
1
2
3
4
5
6