HYDAC ELECTRONIC HDA 4000 Series, Руководство по эксплуатации

Страница: 38 / 60

HDA 4000 with IECEx-Approval
Page 8 of 30
Status: 2014-09-03
HYDAC ELECTRONIC GMBH Mat.
No.: 669746
Input data HDA 4400 HDA 4700
Measuring Ranges bar -1..5 -1..9 6 16 40 60 100 160 250 400 600 1000
Overload ranges bar 15 20 15 32 80 120 200 320 500 800 900
1)
1600
Burst pressure bar 100 100 100 200 200 300 500 800 1000 2000 2000 3000
Measuring Ranges psi 100 150 200 300 500 600 700 750 1000
psi 1500 2000 3000 5000 6000 9000 10000 15000
Overload ranges psi 290 290 460 1160 1160 1160 1740 1740 2900
psi 2900 4600 7250 11600 11600 14500 14500 23200
Burst pressure psi 1450 1450 2900 2900 2900 2900 4350 4350 7250
psi 7250 11600 14500 29000 29000 29000 29000 43500
Mechanical connection see model code / dimensions
Tightening torque See dimensions
Standard Flush membrane
Stainless steel 1.4435; 1.4301 1.4435; 1.4301
Seal FPM FPM
O-ring FPM
Pressure transfer fluid Silicon-free oil
Output data
Output signal 4 .. 20 mA (2-conductor), R
Lmax.
= (U
B
– 12 V) / 20 mA [k Ω ]
Curve deviation at max. setting to DIN
16086 (accuracy class) Typ.
Max. ≤ ±
0.5 % FS
≤ ±
1.0 % FS
≤ ±
0.25 % FS
≤ ±
0.5 % FS
Curve deviation at min. setting Typ.
max. ≤ ±
0.25 % FS
≤ ±
0.5 % FS
≤ ±
0.15 % FS
≤ ±
0.25 % FS
Temperature compensation Typ.
≤ ±
0.015 % / °C
≤ ±
0.008 % / °C
Zero point max. ≤ ±
0.025 % / °C
≤ ±
0.015 % / °C
Temperature compensation Typ.
≤ ±
0.015 % / °C
≤ ±
0.008 % / °C
Over range max. ≤ ±
0.025 % / °C
≤ ±
0.015 % / °C
Non-linearity at max. setting to
DIN 16086 max. ≤ ±
0.3% FS
≤ ±
0.3 % FS
Hysteresis max. ≤ ±
0.4 % FS
≤ ±
0.1 % FS
Repeatability
≤ ±
0.1 % FS
≤ ±
0.05 % FS
Rise time ≤
1.5 ms
≤
1.5 ms
Long term drift Typ. ≤ ±
0.3 % FS / year
≤ ±
0.1 % FS / year
Ambient conditions
Compensated temperature range -20 .. + 85°C
Operating temperature range
2)
-20 .. + 60 °C -40 .. + 60 °C / -20 .. + 60 °C
Storage temperature range -40 .. +100 °C
Medium temperature range
2)
-40 .. + 60 °C / -20 .. + 60 °C
- Marked
EN 61000-6-1/2/3/4
IEC 60079-0/11/26/36
Vibration resistance to
IEC 68-2-6 at 10 ..500Hz ≤
20 g
Protection class to IEC 60529 IP 65 (connector EN175301-803 (DIN 43650) and Binder 714 M18)
IP 67 (M12x1 male connector, for use with IP 67 female connector)
Relevant data for Ex
Application
Ex ia, ic Ex nA, ta, tb, tc
Supply voltage U
i
= 12 .. 28V 12 .. 28 V
Max. input current Ii = 100 mA
Maximum input power P
i
= 1W
max. power consumption
≤
1W
Capacity of transmitter
C
i
≤
22 nF
Inductance of transmitter Li = 0 mH
Insulation voltage 50 V AC with integrated overvoltage protection EN 61000-6-2 or
500 V AC, depending on the model (see model code)
Other data
Reverse polarity protection of the supply
voltage, short circuit protection
excess voltage Standard
Residual ripple supply voltage
≤
5 %
Service life > 10 million cycles
Weight ca. 150 g (Standard)
ca. 180 g (flush mount version)
Note: FS (
F
ull
S
cale) = relative to the full measuring range
B.F.S.L
=
B
est
F
it
S
traight
L
ine
1)
Standard overload range 1000 bar, flush mount version overload range 900 bar
2)
-25°C with FPM seal, -40°C on request