HYDAC ELECTRONIC HDA 4000 Series, Руководство по эксплуатации

Страница: 37 / 60

HDA 4000 with IECEx-Approval
Page 7 of 30
Status: 2014-09-03
HYDAC ELECTRONIC GMBH Mat.
No.: 669746
6. Technical Data
Input data HDA 4100 (Absolute pressure) HDA 4300 (Relative pressure)
absolute and
relative
relative
Measuring Ranges bar 1 2.5 -1 .. 1 -1 .. 9 4 6 10 16 25 40
Overload ranges bar 3 8 3 32 12 20 32 50 80 120
Burst pressure bar 5 12 5 48 18 30 48 75 120 180
absolute and relative relative
Measuring Ranges psi 15 30 50 100 150 250 500
Overload ranges psi 45 100 150 290 450 725 1500
Burst pressure psi 70 150 250 400 650 1000 2500
Mechanical connection see model code / dimensions
Tightening torque See dimensions
Parts in contact with fluid
Standard Flush membrane
Sensor: Ceramic Ceramic
Connector: 1.4301 1.4301; 1.4435
Seal: FPM/ EPDM FPM
O-ring FPM
Pressure transfer fluid Silicon-free oil
Output data
Output signal 4 .. 20 mA (2-conductor), R
Lmax.
= (U
B
– 12 V) / 20 mA [k Ω ]
Curve deviation at max. setting to DIN
16086 (accuracy class) Typ.
max.
≤ ±
0.5 % FS
≤ ±
1.0 % FS
≤ ±
0.5 % FS
≤ ±
1.0 % FS
Curve deviation at min. setting (B.F.S.L.) Typ.
max.
≤ ±
0.25 % FS
≤ ±
0.5 % FS
≤ ±
0.25 % FS
≤ ±
0.5 % FS
Temperature compensation
zero point Typ.
max. ≤ ±
0.02 % / °C
≤ ±
0.03 % / °C
≤ ±
0.02 % / °C
≤ ±
0.03 % / °C
Temperature compensation
Over range Typ.
Max ≤ ±
0.02 % / °C
≤ ±
0.03 % / °C
≤ ±
0.02 % / °C
≤ ±
0.03 % / °C
Non-linearity at max. setting to
DIN 16086 max.
≤ ±
0.5 % FS
≤ ±
0.5 % FS
Hysteresis max. ≤ ±
0.4 % FS
≤ ±
0.4 % FS
Repeatability ≤ ±
0.1 % FS
≤ ±
0.1 % FS
Rise time
≤
1.5 ms
≤
1.5 ms
Long term drift Typ. ≤ ±
0.3 % FS / year
≤ ±
0.3 % FS / year
Ambient conditions
Compensated temperature range -20 .. + 85 °C
Operating temperature range -20 .. + 60 °C
Storage temperature range -40 .. +100 °C
Fluid temperature range
1)
-40 .. + 60 °C/ -20 .. + 60 °C
- Marked
EN 61000-6-1 /2 /3 /4
IEC 60079-0 /11 /26 /36
Vibration resistance to
IEC 68-2-6 at 10 ..500Hz
≤
20 g
Protection class to IEC 60529 IP 65 (connector EN175301-803 (DIN 43650) and Binder 714 M18)
IP 67 (M12x1 male connector, for use with IP 67 female connector)
Relevant data for Ex applications Ex ia, ic Ex nA, ta, tb, tc
Supply voltage U
i
= 12 .. 28V 12 .. 28 V DC
Maximum input current Ii = 100 mA
Maximum input power P
i
= 1W
max. power consumption
≤
1W
Capacity of transmitter C
i
≤
22 nF
Inductance of transmitter Li = 0 mH
Insulation voltage 50 V AC with integrated overvoltage protection EN 61000-6-2 or
500 V AC, depending on the model (see model code)
Other data
Reverse polarity protection of the supply
voltage, short circuit protection Standard
Residual ripple supply voltage
≤
5 %
Service life > 10 million cycles
Weight approx. 180 g
Note: FS (
F
ull
S
cale) = relative to the full measuring range
B.F.S.L
=
B
est
F
it
S
traight
L
ine
1)
-20 °C with FPM or EPDM seal, -40 °C on request