HYDAC ELECTRONIC EDS 8000, Руководство пользователя

Страница: 28 / 68

6
EDS 8000
Status: 04.04.2018
HYDAC ELECTRONIC GMBH
Part No.: 669758
E
5 Controls of the EDS 8000
2 keys ( ↓↑ and E) for adjusting the switch points, switch-back
points and additional functions
4-digit
digital display
LED backlight
to indicate switch points
(red = active / green = inactive)
Use the keys to select the next menu point, or alternatively to adjust the values.
•
To scroll through the menu
•
To increase the value
•
Hold the key down to fast-scroll
through the parameter values
•
To select the menu point
•
To confirm value
6 Digital display
Once the power supply has been switched on, the device briefly flashes "
EdS
", and then
begins to show the actual pressure.
To check the unit of measurement being used for the pressure indication, press
the right-hand key. Depending on the setting, bar, PSI or MPA will be shown.
The backlight changes colour according to the settings of the switch outputs and their switch
points, i.e. when the switch output is inactive or low-level, the relevant backlight is "green",
when the switch output is active or high-level, the relevant backlight is "red".
Backlight
Backlight
for switching output 1 for switching output 2
E
E