Hyd-Mech H4040, Руководство пользователя

Страница: 10 / 57

0.7
MOVING BANDSAW BLADE WILL CUT
Do NOT operate with guard removed.
Do NOT place hands or fingers near moving bandsaw blade.
For blade changing, always follow the proper Blade Changing Procedure, as given in
Section 3 of this manual.
PINCH POINT
Machine parts may move without warning, either because the machine is operating automatically, or because
another person initiates the motion. Keep hands clear of all labelled pinch points, whenever the machine is
running. Machine vises can exert great force and cause severe injury. Keep hands clear of vises and work piece
when vises are opened or closed. Be aware that vise closing or opening may result in potentially dangerous work
piece movement. Be aware also that the opening motion of a vise may create potential pinch points.
MOVING PARTS CAN CRUSH AND CUT
Keep hands clear of chip auger. Lock-out power in accordance with your
company’s lock-out procedures before attempting to clear a jam in the
chip auger.
Be aware that the chip auger may start unexpectedly, either because the
machine is operating automatically, or because another person initiates
the motion.
If the chip auger is stalled because of a jam, it may start without warning
when the jam is cleared, unless the machine power is locked out.