2
Safety Precautions
1.
Always use protective earplugs. The powerpack complies with the EU noise
limit, but by daily long-lasting operation there is a risk of hearing defects.
2.
Always connect hoses before starting.
3.
Never add fuel and oil when the engine is running.
4.
In case of non-operation or performance of service, always turn off the en-
gine.
5.
Never start the engine without side covers.
6.
Operation of the powerpack without tool connected and with lever at “ON”
may cause overheating of the system and damage to the powerpack.
7.
When lifting the powerpack from a vehicle, we recommend the use of a crane.
8.
The pressure relief valves are set at 160 bar from our plant. Never set them
higher.
9.
Always use filters with by-pass. The use of filters without by-pass may blow
the hydraulic hoses and the filter cover.
Filling Up Hydraulic Oil
To fill up with hydraulic oil, loosen
the filter cover on top of the power-
pack.
Remove the filter element (see
photo), and fill up with oil. When oil
is showing at the bottom of the filter
unit, there is enough oil on the
powerpack.
Insert the filter element again, mount
the cover and the powerpack is ready
for use.
Please note: When connecting new extension hoses,
it is necessary to fill up with extra 2 litres of oil.
Therefore always top up the powerpack when
connecting new extension hoses.
