Hyco Zen Spa Series, Инструкция по эксплуатации товара

Страница: 2 / 25

Overview
Thank you for purchasing a Zen Spa 2 in 1 Boiling and Chilled Tap. The Zen Spa is a hot and
cold drinks station that provides boiling water and filtered cold (ambient) drinking water. If
desired an undersink chiller can be purchased to provide filtered chilled drinking water.
In the home it replaces the need for a kettle and provides high quality cold drinking water.
In the office it replaces the need for a wall mounted boiling water unit and separate floor
standing chiller.
Key Features
• Energy efficient boiling water tank.
• Safety lock on the boiling side and a cool touch spout.
• 360° swivel spout.
• Pattern recognition technology to learn and predict boiling water usage.
• Supplied with initial high quality scale filter for the inlet to the boiling tank and a cold
drinking water filter.
• Two temperature settings 100°C and 98°C.
• Can be installed over a sink or with a stylish Zen Font.
• Designed and assembled in the UK.
Always switch off the mains electricity before commencing installation.
Only connect the unit to a single-phase supply as specified on the rating plate.
Ensure tank is full of water and tap flushed through before switching power on.
The supply cord cannot be replaced by the user. If the cord is damaged the
appliance should be returned to the manufacturer or an authorised service agent
for replacement.
The hoses and pipes supplying this heater must not come into contact with any
fixed wiring or the supply cord.
Do not carry the appliance by the supply cord.
An RCD circuit breaker is strongly recommended.
This unit dispenses boiling water.
1. Important Safety Points
2