4
The chiller can be set to deliver a range of chilled water temperatures between 4°C
and 10°C. It is recommended that the lowest setting (1) is used for drinking water.
Higher settings will cause the unit to work harder and in turn increase the
temperature of the installation environment.
After heavy draw-offs of water from the chiller, it will need time to recover before
further chilled water is available. The recovery time will vary dependent on incoming
water temperature but is typically between 8 and 12 minutes for the full capacity of
the tank.
OFF
COLD
1
2
3
4
5
6
C
O
L
D
E
R
7
°
C
8
°
C
10
°
C
5
°
C
6
°
C
4
°
C
Do not connect the electrical supply until the commissioning has been
completed.
Electrical connection
Connect the kettle style lead to corresponding socket located at the rear of the
appliance before plugging the other end into an electrical socket.
Ventilation
Depending on the installation environment and usage of the product appropriate
ventilation may need to be provided in the cupboard housing the chiller such as door
spacers or air vents.
3. Operating the chiller
The stored temperature of the chiller is selectable using the thermostat dial located
on the back of the appliance.