Hyco RHO IN44T, Инструкция по эксплуатации

Страница: 11 / 12

6. Trouble Shooting
Defect Possible cause Action
Water is too hot Temperature set too Turn down the temperature
high on the heater on the heater (see section 6).
Water is too cold Water flow rate is Ensure flow restrictor and
too high spray attachment are fitted.
(see section 4).
Temperature setting Turn up temperature
is too low setting (see section 6).
No display on Unit in standby Turn On the heater
the heater (see section 6).
Power supply problem Check that power is supplied
to heater and is correct
specification as per the rating
label.
Minimum flow not met Ensure a flow of at least
2L/min.
For technical faults that cannot be resolved using the trouble shooting table contact
the technical department on 01924 225200 for further assistance and advice.
7. Guarantee and service policy
This product is guaranteed against faulty materials and manufacture for a period of one
year from the date of purchase. Hyco will in its sole discretion replace, repair or refund
any faulty unit. Incorrect installation and failure to follow correct operating instructions
are excluded. Consequential costs such as labour charges or damage to surroundings
are expressly excluded.
IN44T & IN60TNEW_Layout 1 02/06/2015 14:37 Page 11