Step 3:
Press the clock icon again and this will store the day
as well as highlight the next field which is the hour
of the day.
Step 4:
Use the up/down icons to cycle through the hours,
in this example we will press the up button three
times in order to display 15:00
Step 5:
Press the clock icon to save the hour setting and
move on to the minutes setting.
Step 6:
Use the up/down icon to cycle through the minutes,
in this example we will press the up button three
times in order to select 15:03.
Step 7:
Press the clock to finalise the time.
4.2 Setting the target temperatures
The thermostat settings can only be set whilst the unit is turned on (not standby). Unlike
many panel heaters the Accona timer range utilises two temperature ranges. The first is the
temperature the heater will maintain during the ‘Peak’ setting and the second is the ‘Off
peak’ setting.
Peak : When you want a ‘comfortable’ temperature whilst occupying the room in which
the heater is located. This can be as high as 30°C.
Off Peak : The Off peak (typically night time) temperature setting ensures the room will
not fall below a user chosen temperature. This can be as low as 5°C (frost protection) and
must be a few degrees cooler than the Peak temperature setting.
8
