The pre-loaded schedules that are available are defined in the previous table.
If you wish to have the unit operate in non-timer style you should select pre-set ‘CC’
to switch the heater on/off press the button.
Study the available pre-sets to decide which setting is best suited to the requirements.
Step 1:
Press the
P
icon to enter the schedule selection mode.
This will cause the current selected pre-set to flash.
Upon first operation the default pre-set is ‘CC’.
Step 2:
Press the up/down icon until the desired schedule is
displayed. We have a selected P2 as our schedule.
Step 3:
Once the desired schedule is selected, press the
P
icon to store and run this setting. The display will
now show the selected schedule.
4.4 Programming your own customised schedule
Along with a number of pre-set schedules (see table in previous section) there is also
one schedule that can be used to create your own custom timer settings. This schedule is
represented by the initials ‘UP’ (user programmed).
Step 1:
First select the ‘UP’ mode from the pre-set
programme (see ‘Selecting a pre-loaded
schedule section).
Enter the ‘UP’ editing mode by selecting the
icon. The screen will display the current
day of the week flashing. In the example the
day in question is Monday (Mon).
Step 2:
Next select the day to programme. Simply press
the timer icon until the required day is displayed.
In this example we have selected Wednesday (Wed)
which required two presses of the timer icon.
11
