background image

KEYPHONE OPERATION

12

(((((((((((((((((((((((((((((((

Dual Voice Path is also known as Off Hook Call Announce (OHCA). It
allows User to announce a busy, Handset-using Extension through
Speaker. For response, the called Extension must be a dual-path telephone
equipped with Microphone. 

Description:

When the called Extension is busy:

 

. Dial [1].

Speak to the called party  through Speaker.(announcement)

Using OHCA, The called Extension can talk to the outside party by
Handset and to the calling Extension through the Speaker and
Microphone.

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

F.06  Voice Service Channel 

(((((((((((((((((((((((((((((((((((((

Each Voice channel has 8 segments(maximum) memories for recording
and playing the service voice. The maximum recording time is 60 seconds
for each channel. For the applications and programming, you can refer to
the system programming manual of each system(B1-408, BX8,  BX-
320).

Description:

Each System Voice channel capacity is as follows:

B1-408

BX8

BX-320

System
Capacity

 1 Channel

1 Channel

Depends on the
number of cards
installed

The maximum recording time is 60 seconds for each channel. You can
distribute these 60 seconds into 8 segments.

For example: If the first segment occupies 20 seconds and segment  two
occupies 40 seconds, then the other segments will not be available.

Message Recording must be performed at the Console.

Recording Method:

 

. Handset off hook.

 

. Dial the Voice Channel number.  

The Voice Channel Numbers are 
B1-408

86.    

BX8

: 86

BX-320

: Programmable.

 

. Dial [0].

 

. Record your voice after the tone.

 

.To stop the recording and select the next voice segment.

Playing Method:

 

. Handset off hook.

 

 .Dial the Voice Channel number. 

The Voice Channel Numbers for 
B1-408: 86.    
BX8: 86
BX-320: Programmable.

 

. Dial [7].

 

.The Voice Service Channel will play the recorded voice.

 

. Dial [1] to stop playing or select the next voice segment.

Содержание B80

























Отзывы: