HYBREX B80, Руководство по эксплуатации

Страница: 11 / 24

7 KEYPHONE OPERATION
This is for holding an outside or intercom call. Calls on normal hold can
be retrieved by any Extension.
Description:
To place a call on hold:
. Press [HOLD] key.
To retrieve a held internal call from any Extension
/
. Lift Handset or press [SPK] key.
Held Ext No. . Dial the held Extension number.
To retrieve an external call from any Extension:
/
. Lift Handset or press [SPK] key.
/ CODE .
Press the flashing CO key or Line
Access Codes :
801-804 for B1-408;
801-808 for BX8;
801-840 for BX-320.
The holding Extension will be recalled if it fails to retrieve the
call after a programmed duration (30 to 270 seconds).
2. The "Hold Recall" will ring the holding Extension. If the
call is still not retrieved, the "Hold Recall" will continue to ring
both the holding Extension and the Attendant Console. The
Recall will not stop until it is answered.
3. If there are several calls held at the same time, unless the first
hold recall is answered.
&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
D.02 Call On Exclusive Hold
(((((((((((((((((((((((((((((((((((((((
This is for an Extension to hold an outside call which can be retrieved
only by the holding Extension.
Description:
To place an external call on Exclusive Hold:
6 6
. Press the [HOLD] key twice.
To retrieve by the holding Extension:
/ CODE
.Press the flashing CO key or Line Access Code:
801-808 for the BX-32
801-824 for the BX-96
801-840 for the BX-320.
To retrieve by another Extension:
6
.At other Extensions, the CO LED goes steady.
Press the CO key, Busy Tone will be heard, then press [HOLD].
NOTE: The "Hold Recall" feature is the same as D.01,.
&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
D.03 Conference
(((((((((((((((((((((((((((((((((((((((
An Extension user can set up a Conference with two other parties. (Either
internal or external.)
Description:
Conference with two external parties:
<=
A