After the installation of all elements, check
each exposed length from Table 1. Also check
each set of 15 elements to make sure the ele-
ments are in the proper order. If any element
has to be adjusted or moved, there are extra
pushnuts supplied for partial reassembly.
ATTACHMENT OF COAX ASSEMBLY
Select the coax/circularity switch assembly
(Item 16) and the remainder of the No. S
hardware (Items 23,26 and 31). Attach one of
the two sets of terminals to the front Driven
Element's T-bars (Item 20) as shown in
Figures 5 and 6.
Use black electrical tape, and secure this
coaxial cable to the boom at two locations be-
tween the elements. See Figure 5.
The other coaxial cable coming from the
coupler tube should make a single loop and
its' terminals should attach to the rear DE's T-
bars, as shown in Figure 5. Use black
electrical tape to secure this coaxial cable,
NOTE: To achieve LHCP in the unswitched
mode, the feedpoint solder lugs should be
positioned as shown in Figure 6.
Figure 5
Attachment Of Coax Assembly
