ASSEMBLY OF OTHER ELEMENTS
Select the two (2) reflector elements, 3/16" x
13", marked with two black bands near one end
of each. Also select four (4) insulators and four
(4) pushnuts.
Install the reflector elements in the reflector
mounting holes as shown in Figure 2. Use the
same methods as described for the driven
elements along with the exposed length given in
Select one each of elements - D1, D2, D3, D4
and D5. Identify these elements by the length
and color bands listed in Table 1. Install these
elements on the rear boom section in the
horizontal set of holes shown in Figure 1 and 2.
Start with D1 adjacent to the driven element. Use
the insulators and pushnuts and assemble in the
same manner as described earlier.
Select one each of elements - D1, D2, D3, D4,
D5, and D6. Install these elements on the rear
boom section in the vertical set of holes shown
partially in Figure 2. Start with D 1 adjacent to
the horizontal driven element. Use the insulators
and pushnuts and assemble in the same manner
as described earlier.
Select one each of elements - D6, D7, D8, D9,
D10, D l l, D12, and D13. Install these elements
on the front boom section in the horizontal set of
holes shown in Figure 1.
NOTE: The front boom section has 8 sets of
holes in the "horizontal plane" and 7 sets of
holes in the "vertical plane".
Select the remaining elements - D7, D8, D9,
D10, D11, D12 and D13. Install these elements
on the front boom section in the remaining holes
in the vertical plane.
Item
Total Length
Exposed Length
Color
No
Part No.
Element
Inch
Mm
Inch
mm
Band
1
160057
R
13
330
5 15/16
151
Black (2)
2
160058
DE
12 1/4
311
5 9/16
141
Black
3
160060
D1/D2
11 3/4
298
5 5/16
135
Brown
4
160061
D3
11 5/8
295
5 1/4
133
Orange
5
160062
D4
11 1/4
286
5 1/16
129
Yellow
6
160063
D5
11 3/16
284
5 1/32
128
Green
7
160064
D6
11 1/16
281
4 31/32
126
Blue
8
160065
D7
10 15/16
278
4 29/32
125
Violet
9
160066
D8-D13
10 13/16
275
4 27/32
123
(None)
Table 1
Element Length & Color Band Identification