INSTALLATION
1. Align holes in the support and stand 2
then insert bolts and fasten with attached key.
2. Insert tongue 4 of the kick stand into slot of
the pedal
3. Align holes in the tongue and the pedal, then
insert bolts and fasten with attached key. .
1
1. Loosen the wing nut,
place the tom pad on
the installation L-Rod.
2. Adjust the angle and
height of the tom pad
then tighten the wing
nut.
Tom Installation
Kick Installation
1. Align holes in the sound module and the model mount then insert
screws and fasten it.
2. Insert rod of the model mount into the clamp, then tighten the wing
nut.
Sound module Installation
Please refer to the SOUND MODULE Chapter for electronic connection.
Electronic Connection
P-6B
Finalizing the Installation
After install all components, fine adjust the arm, clamps and rods to
the best position you desire.
2
1
3
3
4
2
1. Remove the wing nut,
washer and felt pad from the
top of the rod.
3. Adjust the pad position
then re-tighten the wing nut.
1. Remove the wing nut,
washer and felt pad from the
top of the rod.
3. Adjust the pad position
then re-tighten the wing nut.
2. Put the Hi-Hat into the
rod, then place back parts
removed in the step 1. Fas-
ten the wing nut but not too
tightly. It allows the pad a little
bit wobbling like real acous-
tic cymbal.
Hi-Hat Installation
Crash and Ride Installation
COMPONENTS INSTALLATION
2. Put the cymbal pad into the
rod, then place back parts re-
moved in the stet 1. Fasten
the wing nut but not too tightly.
It allows the pad a little bit wob-
b l i n g l i k e r e a l a c o u s t i c
cymbal.
2
1
3
1
3
1. Pllace the pad on the installa-
tion L-Rod.
2. Adjust the pad position then
re-tighten the wing nut.
3. Align holes in the pad and the
lock-block , then in sert the
block and fasten with attached
key.
Snare pad Installation
1
1
Содержание HD-010B
Страница 1: ...HD 010B DIGITAL DRUM USER S MANUAL ...