SETUP
Snare ADVANCED
Xtalk TOM1 030
Pad affected by Xtalking
Xtalking coefficient
Cross Talk
When strike a pad, other pad(s) may sound
occasionally. It is called cross talk. This feature al-
lows you to eliminate the cross interference among
the pads. The pad desplayed in the first row of the
screen is source of the cross talk which cross-fire
other pad(s), i.e. when strike this pad, other pad(s)
will sound. This pad is that you selected for setup.
The procedure of eliminating the cross talk is:
- Select a pad which is affected by cross talking. Press a pad select button or strike a pad with middle
strenth.
- Rotate the DATA knob to change the cross talk coefficient
ranged 0 - 127. The larger value will
reduce unexpected cross talking sound, but too large value will cause sound missing. You should
balance it carefully.
- Press the [ENTER] to confirm your setting. The display will stay on the Cross Talk setting for the
current source pad. You could select another pad which is also affected by the current pad and
continue your setting.
- Press the EXIT button to exit current operation and back to Advanced parameter select window.
Source pad of Xtalking
Hi-Hat Pedal Setting
Strike the Hi-Hat pad without pressing the Hi-Hat control pedal to make open Hi-Hat sound (voice No.
286 - 304).
The Hi-Hat pedal has two zones of sound control, which is divided by Close Threshold point. Strike
the Hi-Hat pad while pressing the Hi-Hat control pedal gradually to make consecutive open to close
Hi-Hat sound when pedal pressing position is higher than closs threshold. When pedal position is
lower than close threshold, striking the Hi-Hat pad makes close Hi-Hat sound (voice No. 249 - 285).
When press the pedal quickly and reach the pedal threshold point, it'll make Hi-Hat pedal sound
(voice No. 305 - 316) even don
’
t strike the Hi-Hat pad. The pressing pedal is quicker, the volume is
higher. This bottom position is called Pedal Threshold.
The scale of Hi-Hat pedal movement is 0 - 127. The top position of the pedal is defines as 127 and
bottom is 0.
This feature allows you to set thresholds per your com-
fortable pressing strength.
The Hi-Hat pedal setting is different from other pads.
When select Sensitivity paramete, press the H.PEDAL
button, the pad name will be Pedal. The first param-
eter is Closs THR and its current closs threshold
value will be shown and blinking.
PEDAL ADVANCED
Close THR 48
Hi-Hat Pedal setup
Close THR value
20
Содержание HD-010B
Страница 1: ...HD 010B DIGITAL DRUM USER S MANUAL ...