HWH 225 Series Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 31

HWH 225 Series Скачать руководство пользователя страница 7

OPERATING PROCEDURES

1. Move the STORE LEVERS to the STORE/TRAVEL

CAUTION:

POSITION. This will allow the jacks to retract.

DO NOT MOVE THE VEHICLE WHILE THE

LEVELING JACKS ARE STILL IN CONTACT WITH THE GROUND
OR IN THE EXTEND POSITION. THIS VEHICLE IS EQUIPPED
WITH STRAIGHT-ACTING JACKS. MOVING THE VEHICLE
WITH THE LEVELING JACKS EXTENDED CAN CAUSE
SEVER DAMAGE TO THE JACKS AND OR THE VEHICLE AND
CREATE A DRIVING HAZARD. DO NOT RELY SOLELY UPON
WARNING LIGHTS. IT IS THE OPERATOR’S RESPONSIBILITY TO

RETRACT PROCEDURES

CAUTION:

THE STORE LEVERS SHOULD BE

KEPT IN THE "STORE" POSITION WHILE TRAVELING
TO KEEP THE JACKS IN THE STORE/TRAVEL POSITION.

CAUTION:

MAKE SURE THAT PEOPLE AND

EQUIPMENT ARE CLEAR OF THE VEHICLE.

CHECK THAT ALL JACKS ARE FULLY RETRACTED INTO
THE STORE/TRAVEL POSITION.

3. Push the "ON/OFF" switch on the panel to the "OFF"
position. Turn the ignition off or proceed to travel.

STORE

STORE/TRAVEL POSITION

FRONT

REAR

JACK
CONTROL

LEVER

LEVER

STORE
LEVER

LEFT

RIGHT

CAUTION!

UNDERSTAND OPERATOR’S MANUAL BEFORE USING.

BLOCK FRAME AND TIRES SECURELY BEFORE

REMOVING TIRES OR CRAWLING UNDER VEHICLE.

ON

OFF

EXTEND

REAR

REAR

OPERATE

FUSE

STORE

5 AMP

FRONT

STORE

HYDRAULIC LEVELING

ON

EXTEND

EXTEND

FRONT

HWH

NOT IN

EXTEND

PARK/
BRAKE

OPERATE

EXTEND

POSITION

STORE/TRAVEL

POSITION

2. Visually check that all jacks are in the STORE/TRAVEL
position. With the ignition switch in the "ON" position, the red
WARNING lights, the master "JACKS DOWN" light and the
buzzer should be off.

MP35.203J

13FEB04

NOTE: The "POWER ON" light on the leveling system
panel must be on to Extend or Retract any room.

«
...
5
6
7
8
9
...
»

Содержание 225 Series
































Отзывы:

Нет отзывов