Hwasung HMK-056, Руководство пользователя

Страница: 42 / 69

Model Rev. Page
HMK-056 Ver1.01 41
GS+’!’+n
[Name]
Set the proportion of character extention
[Format] ASCII GS ! n
Hex 1D 21h n
Decimal 29 33 n
[Range] 0≤n1≤255 (horizontal / vertical portions is restricted maxim value 8)
[Initial Value]
n=0
[Descript.] Set the proportion of character extention
[Caution] Caculate the numberic value if vertical & horizontal is extended in the same time
ex.) x3 (Horizontal Rate), x3(Vertical Rate) : n=32+2=34
Bit Function
0-3
Set the extension proportion in vertical
4-7
Set the extension proportion in horizontal
Extension in Horizontal Extension in Vertical
GS+’(’+’K’+pL+pH+fn+m (fn=49)
[Name]
Set the printing density
[Format] ASCII GS ( K pL pH fn m
Hex 1D 28h 4Bh pL pH fn m
Decimal 29 40 75 pL pH fn m
[Range] pL=2, pH=0, fn=49
0≤m≤5, 251≤m≤255
[Initial Value] m=0
[Descript] Set the printing density
m Density m Density
- -
0 Standard
251 Level –5 1 Level +1
252 Level –4 2 Level +2
253 Level –3 3 Level +3
254 Level –2 4 Level +4
255 Level -1 5 Level +5
[Caution]
In case of setting the density above the standard level will shorten the
thermalhead’s life cycle.
It is recommended to use within the standard density range.
n(Hex) n(Decimal) Rate
00h 0 x1
10h 16 x2
20h 32 x3
30h 48 x4
40h 64 x5
50h 80 x6
60h 96 x7
70h 112 X8
n(Hex) n(DecimaL) Rate
00h 0 x1
01h 1 x2
02h 2 x3
03h 3 x4
04h 4 x5
05h 5 x6
06h 6 x7
07h 7 X8