Hwasung HMK-056, Руководство пользователя

Страница: 23 / 69

Model Rev. Page
HMK-056 Ver1.01 22
1)SW1 :
 p(70
16
) Setting : When executing cutting command (DC3 + “i”), move from the black mark
point to the plus position up to the value set in SW2, then cut from that position.
 m(6D
16
) Setting : When executing the cutting command (DC3 + "i", move up to the value
set in SW2, then cut in that position.
2)SW2 : Setting the distance from the black mark point to the cutting position
 When SW1 is @ p : You can set from 0~1200(0 ~ 150mm).

When SW1 is @ m : You can set from 0~120(0 ~ 15mm).
※
Indicates 0.125mm per set value ex) When set on 100 : 100 x 0.125 = 12.5mm
※
SW1 and SW2 are also used in Windows Driver to set the Cutting option to Black Mark Search
(Full Cut). (Windows Driver : use DC3+”i” command)
ex)
ABCD ABCD
When SW1 = p, SW2 = 100 When SW1 = m, SW2 = 100
[Front, Printing Side] [Front, Printing Side]
12
.5
mm
Blackmark
point
Cutting position
Blackmark
Point
Cutting
Position
12
.5
mm
1page
2page
1page
2page
※
Left Blackmark
(Backside)