Hwasung HMK-056, Руководство пользователя

Страница: 30 / 69

Model Rev. Page
HMK-056 Ver1.01 29
SUB+’R’+n
[Function]
Set the character outline
[Code] ASCII SUB b n
Hex 1A 52h n
Decimal 26 82 n
[Range] 0≤n≤1
[Description] n=0 : cancel outline (border) of character in tetragon.
n=1 : Set outilne (border) of charcater in tetragon.
[Caution] When expanding in horizontal it is effective up to 8 times, however
It is only effective up to 2 times for vertical expansion.
SUB+’s’+n
[Function]
Set the printing speed
[Code] ASCII SUB s n
Hex 1A 73h n
Decimal 26 82 n
[Range] 1≤n≤14
[Initial Value] n=14
[Description] n=1 : Prints in Speed 70mm/s. n=11 : Prints in Speed 170mm/s.
n=2 : Prints in Speed 80mm/s. n=12 : Prints in Speed 180mm/s.
n=3 : Prints in Speed 90mm/s. n=13 : Prints in Speed 190mm/s.
n=4 : Prints in Speed 100mm/s. n=14 : Prints in Speed 200mm/s.
n=5 : Prints in Speed 110mm/s.
n=6 : Prints in Speed 120mm/s.
n=7 : Prints in Speed 130mm/s.
n=8 : Prints in Speed 140mm/s.
n=9 : Prints in Speed 150mm/s.
n=10 : Prints in Speed 160mm/s.
[Caution] As the print speed lowers, the print density becomes dim, so you need to control the
density using the density command.