HW Group STE 2, Руководство пользователя

Страница: 6 / 44

HW group 6
STE2 – User Manual
Connectors and wiring
Description of connectors
• Ethernet – Serves for internet connection via cable for operation in a classic computer network
and for configuration of operation on WiFi. The connector supports power supply from the
computer network via PoE.
• Temp/Humidity – Serves to connect up to 3 temperature or humidity sensors. The sensor length
may be up to 60 metres in each port.
• Power – Connector for 5V power supply in the case of power supply from an external adapter.
• Digital Inputs – Serves to connect sensors with digital output.
LED diodes on the front panel
• Link – A green LED signalises connectivity to the computer network.
• Activity – A yellow flashing LED signalises ongoing communication on the cable connection to
the computer network.
• WiFi – A blue LED signalises establishment of a connection to the WiFi connection point. When
establishing a connection, it signalises the state by flashing.
• Alarm LED – Two LEDs hidden in the Port1 and Port2 connectors. Shining LEDs indicate Alarm state.
• Alarm SENS – Shining LEDs signalises Alarm state on one of the temperature or humidity sensors.
• Alarm DI – Shining signalises Alarm state on one of the digital inputs.
Description of button function
• Reset – serves to restore factory settings on the device.
1. Switch the device off.
2. Press and hold the button.
3. Switch the device on and press the button for another 5 seconds.
4. All the LEDs will gradually light up.
5. Restart the device. Factory settings will be restored.
Power Jack
Reset
Power
5V
WiFi
DI1 Port2
Alarm DI
Port1
Alarm SENS
DI2 Ethernet
Temp/Humidity
WiFi LED
Reset Button
Alarm LED
Digital Inputs
Link
Activity