HW Group STE 2, Руководство пользователя

Страница: 14 / 44

HW group 14
WiFi modem state
• Disable – Wifi is disabled.
• Wait for power on – Waits for WiFi module when power on.
• Init – Initializing of WiFi module.
• Connecting – Connecting.
• SSID check – SSID check.
• Connected – Connected to selected WiFi network.
• Network WiFi scan – Scan of available WiFi networks.
• Wait for scan – Waits for Network wifi scan.
Information section
• Current SSID – Current name of the network to which the device is connected. If the parameter
is missing, the device is not connected to any WiFi network.
• Current BSSID – Current identifier of the WiFi network connection point. If the parameter is missing,
the device is not connected to any WiFi network.
• Current RSSI – Relative strength of signal input. The higher the RSSI, the stronger the signal.
• Signal Quality – Strength of WiFi signal in % with graphic indicator.
• Current Channel – WiFi channel on which the device communicates. If the parameter is missing,
the device is not connected to any WiFi network.
WiFi Setup section
• WiFi Enable – Enable or disable WiFi. By standard, the wireless interface is disabled. Device
restart follows enabling.
• SSID – Name of the WiFi network to which should be the device connected. If you do not know
your network name, use the Scan AP function at the bottom of the page.
• Password – Secured network password. If you do not know it, contact your network administrator.
• BSSID – Identifier of the WiFi network connection point (MAC address of the connection point).
Optional data.
Network section
WiFi network parameters. Only the wireless interface is set here. Cable Ethernet (RJ-45) is set
in the General Setup tab.
• DHCP – Permits the function of IP address setting by the DHCP server, if available. Enabling or
disabling DHCP depends on the needs of the user and network administrator.
• IP Address – IP address of the device, allocated by the network administrator.
• Network Mask – Network mask, allocated by the network administrator.
• Gateway – IP address of default gateway, allocated by the network administrator.
• DNS Primary / DNS Secondary – IP address of the DNS server, allocated by the network administrator.
WiFi Scan List
• SSID – Name of found WiFi network.
• BSSID – Connection point identifier (MAC address).
• Channel – WiFi channel on which the connection point operates.
• Security – Type of secured WiFi communication.
• Signal – Signal level in DB. The higher the value, the better. WARNING, -60 is more than -90! The
highlighted row indicates the currently connected AP.
STE2 – User Manual