Damocles MINI
–
starting guide
HW group
www.HW-group.com
4) Flash SETUP of device
To open the FLASH page, support of FLASH
application has to be installed in your PC. If PC is
connected to Internet, necessary Plug-in is
downloaded automatically, if the computer isn´t
connected, it is necessary to install
Plug-in
from
supplied CD -
\Damocles\install_flash_player_7.msi.
For detailed description of Flash SETUP, see product
manual.
5) We test the inputs and outputs
To prove state of inputs and control outputs, use
WEB
>>
Flash Setup
>> bookmark
Status
Outputs
o
Set „
Reload values every 1 [s]
” below on the right and press “
Start
”
o
In the category Outputs, change the value of one of the outputs and press „
Apply
Changes
“. You will hear a click of relay in Damocles unit and signal indicator LED of
output will signal the state of output relay.
o
The outputs are labelled
NO
(Normally Open) and
NC
(Normally Close), middle pin
is common. Interconnection of inner contact relay corresponds with the states on the
picture.
Inputs
o
To prove the inputs, it´s enough to connect the inputs by wire or clip.
o
Switch the function „Counter“ on, from
Flash Setup
interface you can find the number
of pulses.
NO NC
Output On
NO NC
Output Off
Input On
Input Off
Output 1
