9
has been proved and confirmed by Huvitz or the manufacturer of the accessory.
9.
Keep the User
’
s Manual and Service Manual in a place easily accessible at all times for persons
operating and maintaining the equipment.
10.
Do not force cable connections. If a cable does not connect easily, be sure that the connector (plug) is
appropriate for the receptacle (socket). If you cause any damage to a cable connector(s) or
receptacle(s), let the damage(s) be repaired by an authorized service technician.
11.
Please do not pull on any cable. Always hold on to the plug when disconnecting cables.
12.
Before every operation, visually check the equipment for exterior mechanical damage(s) and for
proper function.
13.
Immediately turn off and unplug any equipment that gives off smoke, sparks, strange noises, or odors.
14.
After the equipment has been used in an observation of a specimen that is accompanied with a
potential of infection, clean the parts coming in contact with the specimen to prevent infection.
15.
ln case the specimen is damaged by erroneous operation, promptly take the infection prevention
measures.
16.
Power Supply Cord set (international) - (Detachable) Rated 10 A, 250 V. Plug type CEE 7/VII,
Connector type IEC 60320/C13, and Cord type H05VV-F3G, min. 0.75 mm2, 3-conductor terminating
in molded-on grounding type attachment plug. <HAR> marked on the cord. Maximum 4.0 m long.
17.
Do not position the equipment so that it is difficult to operate the disconnecting device. (disconnecting
device: power cord, appliance inlet, etc.)
18.
When moving the microscope, grasp rear handle and the base with more than two peoples as shown
below.
To avoid the risk of electric shock, this equipment must only be connected to a supply
main with protective earth.
The protection provided by the equipment may be impaired if the equipment is used in a
manner not specified by the manufacturer.
Содержание HRM-300
Страница 1: ...1 HRM 300 Upright Microscope 표지그림 변경 부탁합니다 ...
Страница 17: ...17 ...
