Huvitz HPE-810, Руководство пользователя

Страница: 111 / 155

111
111
7.2.2.
Adjustments
You can adjust the options related to edging process.
CAUTION
 Adjustment settings are closely related to the edging quality, so keep the system default
values as much as possible.

If you want to change adjustment values, ask to the service technician of HUVITZ or the
technician authorized by HUVITZ.
 Please backup the configuration data to your SD card before you change adjustment
values.
 If the edging does not process well because of the wrong adjustment value, you can
return to the previous state.
<General>
Set basic edging options.

Edging Room Window Open Warning
– The processing stops if you open the window by
force while processing.

Edging Room Window Safety Mode
–You cannot open the window until the wheel stops
completely after finishing edging.

PC/TRI Edging Order
– The order of polishing and grooving for PC/TRI lens is set.

Swap Pump1, 2
– When Pump 1 is out of order, you can substitute Pump 2 for it.
!