Huvitz HLM-1, Руководство по обслуживанию

Страница: 26 / 52

Auto Lensmeter HLM-1
25
No Component Removal method
1
B4_BACK-BONE
-
Disconnect ‘PD Bar Board’ cable from ‘Main Board’.
- Remove cap [19]
- Remove 4 screws on back side of [16].
(reference 3.3.1 PD-Bar Sub-Assembly)
- Then, remove 1 screw on back side of [16] from the [1].
Then, separate it. (Be careful contact with [18])
-
Please see the drawing for disassemble, as needed
- Be careful to prevent from interfering with the [18]
which is included in the optical components
when assembling or disassembling the PD assembly.
- Assembly is the reverse procedure of disassembly.
2
B4_CCD-CAMERA-COVER
3
ROUND HEAD SCREW (2*3)
4
FRAME CR RUBBER 1
5
B6_LED-BONE-ASSY
6
SHAFT FIX BRACKET
7
GUIDE SHAFT 4
8
B4_FOOT-EXTENSION-SPRING
9
FOOT MOVING BLOCK DAMPER
10
FOOT-MOVING-BLOCK-ASSY
11
B4_FOOT-FRAME-ASSY
12
B4_PEN-SLIDE-ASSY
13
B4_PEN-FRAME-ASSY
14
FIXING BRK ASSY
15
B6_BODY-FRONT-COVER
16
B6_PD-BAR-ASSY
17
B6_PD-PINION-ASSY
18
B4_FILTER-HOUSING-ASSY
19
FILTER-HOUSING-CAP-13
20
FILTER-HOUSING-CAP-13-INSERT
21
HARNESS(MB(CN10) TO LVDS)
22
PCB ASSY(CMOS-V090)
23
SCREW (3*5)
24
SEMS SCREW (3*8)
25
TAPPING-SCREW2-PH-M3L5-NI
26
WRENCH BOLT
27
WRENCH-M2L4-NI
28
WRENCH-M2_5L4-NI
29
WRENCH BOLT
30
SPRING WASHER (3)
31
PLANE WASHER (3*8,0.5T,SUS)