Huvitz HLM-1, Руководство по обслуживанию

Страница: 13 / 52

12
AUTO
-
LE
NSMETE
R
2.4.
How to Set Prism
If the measured value is not accurate, you should set the 2

, 5

, 10

,
15

,
20

lens again
by using the standard lens-set.
A.
First, convert prism display format into P-B.
B.
Then, press the ‘PRISM’ (Key 2) button.
C.
After selecting the 2

lens from the standard lens set, place it on the lens cap.
D.
‘-0.01’ button and ‘+0.01’ button by the given value in the Standard Lens-set
specification.
E.
Rotate it to become the center position of 0~30(A0) degree.
F.
Press the ‘MEASURE’ button and check if ‘A0/A1/A2/A3/A4/A5/A6/A7/A8/A9/A10/
A11:’ value is changed.
G.
Repeat from step E ~ F to the center position of 331 ~ 360(A11) degree.
H.
Finally the ‘SAVE’ button to save.
I.
Repeat the procedures from C to H for 5

,
10

, 15

lens and
20

lens.
‘Prism’ screen will show the following information:
-
PRISM : 2 Prism, 5 Prism, 10 Prism, 15 Prism, 20 Prism
-
Idx : Display prism index currently.
-
ANGLE : Display axis index currently.