Huvitz HDR-7000, Руководство по обслуживанию

Страница: 9 / 38

- 9 -
•
ALT + NEXT
3.2.2 Post aging test procedures for Main Body
①
Check the PD adjustment function.
•
Press PD button.
•
Check if the PD-check lenses are inserted properly.
•
Turn the dial clockwise or counter-clockwise several times.
•
Press PD button again to finish this step.
②
Check the convergence function.
•
Press FAR and NEAR button on the display several times.
•
Check if the Refractor Body is converging correctly.
•
Stop this step when the HDR-7000 Refractor Body is in FAR mode.
③
Check the initialization sequences again.
•
Turn off the power.
•
Turn on the power again.
•
Check if the disk plates in the Refractor Body are aligned properly after the initialization
sequences.
•
Repeat this step 3 to 5 times.
④
Check the auxiliary lenses.
•
To enter the lens-checking mode, press the following key sequences.
ALT + MENU
ALT + START
ALT + TEST
CheckLens(F3)
•
Change the selection of eye to binocular:
By pressing the OU button.
•
Skip SPH and CYL lenses by pressing ‘+’ button 4 times.
•
Check the auxiliary lenses one by one.
By comparing the lenses in the test windows of Refractor Body with the information on the
LCD of the Operation Panel.
•
Finish this step when all the auxiliary lenses are checked.
By pressing the MENU button and CANCEL(F7).