Huvitz HDR-7000, Руководство по обслуживанию

Страница: 21 / 38

- 21 -
4.3 Replacement procedure of each sensor
(1) Remove the upper front, upper Rear
c o v e r s o f t h e m a i n b o d y, a n d f r o n t
and Rear covers
(2) Disconnect the connector of the sensor to be replaced.
(3) Unscrew the screws and remove PI or HALL sensor.
* With a cutter knife, draw lines along the sensor board shape on a metal plate as shown in the
right figure, so that you c a n s e e t h e o r i g i n a l f i x i n g p o s i t i o n later.
(4) Adjust the position of sensor so that it has proper distance from sensing target.
<Adjusting the position of PI sensor>
<Adjusting the position of HALL sensor>