Huvitz HDR-7000, Руководство по обслуживанию

Страница: 8 / 38

-8-
3. Confirmation Check Procedure
3.1 Purpose of confirmation check
The purpose of inspecting the Huvitz product before taking it out for installation at customer’s place is
to find out possible defects or changes on original alignment made on them during the shipping and to
confirm the settings for normal operation.
3.2 Confirmation check
Confirmation check includes the procedures listed below.
u
Checking the initialization :
After test installation, check if it finishes its initialization sequence without any abnormal
symptom such as strange noise or smell, abnormal movement.
u
Checking normal operation by self-execution :
Once it’s turned on and ready, perform the self-execution mode to see if it operates without
problem. It’s also aimed to give some stress on the mechanical parts of the Refractor Body.
u
Eye inspection on the Refractor Body :
After the self-execution, check with your eyes if the Refractor Body functions and
responses correctly.
u
Eye inspection on the Operation Panel :
Check with your eyes if the Operation Panel functions correctly.
u
Checking data communication :
Install and interface more optometric instruments with Digital Refractor and check if they
are interacts well with it.
3.2.1 Checking the initialization
① Preparations
Install a HDR-7000 digital refraction system to be checked.
Check if the HDR-7000 system is performing the initialization sequences correctly..
② Procedure
To begin a aging test, press the following key sequences on the Operation Panel.
•
ALT + MENU
•
ALT + START