Huvitz CLM-4000, Руководство по обслуживанию

Страница: 32 / 72

Auto Lensmeter CLM-4000
31
No Component Removal method
1 Body front cover(Upper)
2 TFT-LCD
3 PCB cover
4 Button PCB
5 Button
6 Brightness knob
7 Membrane switch
8 Membrane switch sticker
9
10
11
12
13
14
15
16
17
18
19
20
- Let's separate the 'Body front cover(Upper)'. First,
remvoe 4 screws.
- Next, remove 4 spring screws at the TFT-LCD 2' and
separate the 'Body front cover(Upper)' and the body.
- Remove 4 M2X8L screws at the 'Button PCB 4'and
separate the 'Button PCB 4' and the
'Body front cover(Upper)'.
- And then, separate the 'Button 5' and the 'Brightness
knob 6' and the 'Pcb cover' and 'Button Pcb 4'.
- Remove the 'Membrane switch' from the 'Body front cover'
through unscrewing M2X6L screws.
- Remove the 'Membrane switch sticker'. Clear the gluing
completely on the 'Body front cover'.
That doesn't make any problem when we stick again
the 'Membrane switch sticker'.
- Be careful that Cast materials don't have any harm while
assembly or disassembly.
- Assembly is the reverse procedure of disassembly. Note
that the
‘
Body front cover(Upper)
’
is included in spare
parts.
Therefore, don
’
t separate the
‘
Body front cover(Upper)
without a special agreement from the manufacture.