Huvema MIP 30, Руководство пользователя

Страница: 5 / 17

-4-
1. Features
The MIP 30 machine consists of:
- Engine base
- Bending mechanism
- Driving mechanism
- Front guard
- Back guard
- Driving pedal
- Electric installation
2. Use range
The MIP 30 Profile roller is used for bending steel profiles got by rolling. The machine is equipped with a set of
standard rollers used for bending profiles of parallelepiped section. For other type of profiles there are special
sets of rollers available. These rollers are to be found on the table below and are delivered on demand.
1. Round profile
≤
30
MIP 30-15-4-0
Guide roll Ø30 MIP 30-15-4-1 2
Guide roll Ø25 MIP 30-15-4-2 2
Guide roll Ø20 MIP 30-15-4-3 2
Guide roll Ø15 MIP 30-15-4-4 2
Leading roll Ø30 MIP 30-15-4-5 1
Leading roll Ø25 MIP 30-15-4-6 1
Leading roll Ø20 MIP 30-15-4-7 1
Leading roll Ø15 MIP 30-15-4-8 1
Short distance piece MIP 30-8-3 3
Long distance piece MIP 30-8-4 3
2. Profile with clean inside MIP 30-15-5-0
Flange Ø148x13 MIP 30-15-5-1 2
Ring Ø58x5 MIP 30-15-5-1 2
Ring Ø58x4 MIP 30-15-5-2 2
Ring Ø58x3 MIP 30-15-5-3 2
Ring Ø58x2 MIP 30-15-5-4 2
Guide roll R6/R5 MIP 30-15-5-5 2
Guide roll R3.5/R2.5 MIP 30-15-5-6 2
Leading roll MIP 30-8-2 1
Short distance piece MIP 30-8-3 3
Long distance piece MIP 30-8-4 3
3. Profile with clean outside MIP 30-15-6-0
Flange Ø148x3 MIP 30-15-3-2 1
Clean Ring MIP 30-15-6-1 1
Clean Ring MIP 30-15-6-2 1
Clean Ring MIP 30-15-6-3 1
Clean Ring MIP 30-15-6-4 1
Leading roll R6/R5 MIP 30-15-6-5 1
Leading roll R3.5/2.5 MIP 30-15-6-6 1
Guide roll MIP 30-8-1 2
Short distance piece MIP 30-8-3 3
Long distance piece MIP 30-8-4 3