Huvema HU 410 x 800 VAC TOPLINE, Инструкция по эксплуатации

Страница: 22 / 30

Operation Manual of Horizontal Lath
22
5. Chuck and its Installation
When mounting the chuck and the surface plate, first of all to ensure clean of the
spindle and the taper part of the chuck.
Warning
When adopting the four-jaw chuck and the surface plate, be sure to take care of the
limit of the speed of the spindle.
The chuck with defects such as crack etc. is not allowed to use on the lathe.
The steel plate three-jaw chuck is recommended.
6. Safe Operation of the Lathe
Safe Regulations of the Lathe
Before starting the lathe, read the operation instruction on the manual carefully.
For the sake of safety, please read the guidance of safe operation at the beginning of
the manual.
Key points are as follows:
1. Ensure to master the way to stop the machine before starting it.
2. Stop operation of the lathe immediately in case any accident occurs.
3. Ensure cutting speed, feed and cutting depth to be suitable with the processed
parts and the jigger.
4. When the spindle is rotating, do not contact the tool, the chuck and the
workpiece.
5. Wear and use suitable protective articles and devices.