Huvema HU 32 SUPER VARIO, Руководство пользователя

Страница: 12 / 24

12
CHANGES AND T YPING ERRORS RESERVED CHANGES AND T YPING ERRORS RESERVED CHANGES AND T YPING ERRORS RESERVED
Turn the machine off and disconnect it from the mains before maintenance or repairs are performed!
• Take out the 4 screws and take away the cover (figure 18).
• Wipe off any oil on the spring lock cover so it does not slip when you hold the cover. Wear protective gloves.
• Loosen the lock nut (figure 19 and 20) and pull the cover a little bit toward you (see figure 21), so that it comes free
of the spring cover lock slot (figure 19). Note: It is important to keep a good grip during this step. Letting go of the
cover will cause the spring to rapidly uncoil.
• Rotate the cover counterclockwise to increase spring tension, or let the cover slowly unwind in a clockwise
direction to reduce spring tension.
• Engage the next available spring cover lock slot and push the spring lock cover back.
•
Retighten the lock nut and replace the cover.
10. D
imensions
Spindle taper M.T.#3 M.T.#3 M.T.#4
Spindle travel 140mm 140mm 145mm
Spindle speed (rpm) 105 – 2650/min 80 – 2500/min 70 – 2000/min
Number of speeds 9
×
2 steps Variable Speeds Variable Speeds
Motor 1.1kW 400V 3Ph 3.6A 1.5kW 400V 3Ph4A 2.2kW 400V 3Ph6A
Net weight (kgs) N.W-290Kg N.W-290Kg N.W-330Kg
Dimensions(m/m)
JS-834/834V JS-840VB
A 1810 1900
B 660 696
C C=320
×
c1=480 C=400
×
c1=470
D D=660×d1=465 D=660×d1=465
E 720 715
F 1130 1145
G 1000 1050
H 230 300
I

102

115
T 14 14
V Max 75 --------
19
7. Control circuit diagram and component part list;
HU 32 Super Vario HU 40 Super Vario