Huvema HU 1300 X 4 ES, Руководство по эксплуатации

Страница: 9 / 32

8
VII Maintenance
1
、
The machine should be used by an experienced operator. The
operator must read this manual carefully before operating.
2
、
Keep work area clean. Paint rust-proof oil on un-painted section and
sliding section of the machine.
3
、
Keep shearing blade edge sharp. If you find any damage or wear or
bull, please re-grind the blade or change a new blade. And it is avoid
to shear and cut the broken material which is too thick or the material
with rigid scar
、
residue
、
welding line
、
damaged edge and so on.
4
、
Please use clean and anti-corrosive lubrication oil.
5
、
Operate the machine exactly according to operation manual. Don’t
overload the capacity of the machine to avoid the damage to the
machine parts or blade.
6
、
At working, should any abnormal circumstance happened, the
operator must stop the working at once. Then turn the power off,
inspect the reason by a qualified technician.
7
、
When finishing the work, please turn the power off, and clean the
machine.
8
、
Inspect the electric system periodically. After inspection and repair on
the gear reduction motor, please carefully check the rotating direction
and speed are right.