Huvema HU 1300 X 4 ES, Руководство по эксплуатации

Страница: 6 / 32

5
Ⅴ
Adjustment for the shearing edge gap
1. Relation between Plate thickness with cutting edge data (Picture 3)
(Cutting edge data can cut 2mm when the machine was made out)
0.15 0.20
3
4
0.10 0.05
1
2
Cutting edge （mm）
（mm）
Thickness
Picture 3
2. Regulation means: (Picture 4)
Loose screw 1 and nut 3 slightly. Tight nut 4 at the condition of bolt 5 is fixed.
The cutting edge thickness will increase; Loose screw 1 and nut 4 slightly. Tight
nut 3 at the condition of bolt 2 is fixed. The cutting edge thickness will reduce.
Check cutting edge date with gauges feeler, tight all the nuts and screws after
make sure it matches with plate thickness. Please note both sides must be
adjusted to consistent and the Nut #6 must be loosen before adjustment and
then fixed after adjustment.