Huvema 19002, Руководство пользователя

Страница: 5 / 53

4
(15) MAINTAIN TOOLS IN TOP CONDITION.
Keep tools sharp and clean for best and safest performance. Follow
instructions for lubricating accessories.
(16) DISCONNECT TOOL before servicing and when changing accessories
such as blades, bits, cutters etc.
(17) USE RECOMMENDED ACCESSORIES.
Consult the owner's manual for recommended. The use of improper
accessories may cause hazards.
(18) AVOIDE ACCIDENTAL STARTING
Make sure witch is in “OFF” position before plugging in power cord.
(19) NEVER STAND ON TOOL
Serious injury could occur if the tool is tipped or if the cutting tool is
accidentally contacted.
(20) CHECK DAMAGED PARTS
Before further use of the tool, a guard or other part that is damaged
should be carefully checked to ensure that it will operate properly and
perform its intended function-check for alignment of moving parts,
breakage of parts, mounting,. and any other conditions that may affect
its operation. A guard or other part that is damaged should be
properly pre-paired or replaced.
(21) DIRECTION OF FEED
Feed work into tool bit against the direction of moving of the tool bit
only.
(22) NEVER LEAVE TOOL RUNNING UNATTENDED. PUSH POWER
STOP.
Don’t leave tool until it comes to a complete stop.
(23) DRUGS, ALCOHOL, MEDICATION.
Do not operate tool while under the influence of drug, alcohol or any
medication.