HUSTLER Super 104, Руководство оператора, Страница: 36 / 60

REV B 4-4 606835
Fuel Evaporation System Filter
Some Hustler
®
Super 104™ mowers have a fuel evaporation
system filter. This filter must be checked and replaced every
500 hours or annually whichever comes first. Figure 4-7
Engine Oil and Filter
Check engine oil daily and after every 4 hours of operation.
Machine must be sitting level when checking oil. Refer to
engine manual and maintenance schedule for oil
recommendation and capacities.
IMPORTANT: Change the engine oil and filter after the
first 5 hours of operation and per the engine manufacturer’s
recommendations after that. If mower is being operated in
extremely dirty conditions, then it is recommended oil be
changed more frequently.
IMPORTANT: After the new oil filter has been installed,
clean up any oil which may have spilled onto the engine plate,
engine exhaust system, and muffler guard.
Draining the engine oil:
1. Locate the oil drain valve on the engine. Figure 4-8 &
Figure 4-9
2. Position a suitable oil drain container under the
machine below the oil drain valve.
3. Turn the valve counterclockwise to open the valve.
Allow 10 minutes for engine oil to adequately drain.
4. After oil is drained, close the valve by turning it
clockwise.
5. Clean up any spilled oil.
IMPORTANT: All oil drips or spills must be cleaned off
of the engine plate, engine exhaust system, and muffler
guard before operating the machine.
A. Right fuel tank
B. Closed position
C. Left fuel tank
Figure 4-6
A. Fuel evaporation system filter
Figure 4-7
C
B
A
A
If the engine has been running and is up to
operating temperature, allow the engine to cool
before changing the oil. Engine and engine oil will
be very hot, so be very careful when changing oil
and wear the appropriate protective gear to avoid
being burned or exposed to engine oil.
Vanguard engine shown
A. Oil drain valve
Figure 4-8
WA
R
N
IN
G
A