manualshive.com logo in svg

HUSTLER Super 104, Руководство оператора, Страница: 26 / 60

Поделиться
Скачать
HUSTLER Super 104 Скачать руководство пользователя страница 26

REV B

3-6

606835

Mower Operation

This mower is equipped with the SmoothTrak™ steering 

system. The following provides you with detailed information 
on how to operate the mower efficiently.

Driving the Mower

 

 

After starting engine, engage the steering control levers 

and steer as follows:

To go forward,

 push steering control levers forward an 

equal distance. Figure 3-9

To go in reverse,

 pull steering control levers rearward an 

equal distance. Figure 3-9

To turn left,

 move the right steering control lever farther 

forward from neutral than the left steering control lever.

To turn right,

 move the left steering control lever farther 

forward from neutral than the right steering control lever. 
Figure 3-9

Zero radius turn,

 move one steering control lever forward 

and the other steering control lever back of neutral. This will 
allow the drive wheels to counter-rotate. Figure 3-9

To stop or decrease speed,

 move steering control levers to 

neutral. When going forward pull back gently on steering 
control levers. When going in reverse push forward gently on 
steering control levers.

For emergency stop,

 when traveling forward or rearward, 

place the steering control levers in the park brake position 
immediately. 

 

To make a three point turn to the right:

 

1.

Move the left steering control lever farther forward 
from neutral than the right steering control lever and 
start the turn. Figure 3-10

2.

Next, pull back on the steering control levers until they 
pass neutral and the machine starts to go rearward. 
Figure 3-10

3.

Pull the right steering control lever farther rearward 
from neutral than the left steering control lever until 
the rear of the machine pivots around. Figure 3-10

4.

Then, push the steering control levers forward until 
they both pass neutral and the machine starts to go 
forward. Figure 3-10

5.

Push the left steering control lever farther forward 
from neutral than the right steering control lever and 
finish the turn. Figure 3-10

IMPORTANT:  

Damage to the hydraulic system compo-

nents may occur with rapid movement of the steering con-
trols.

To increase speed,

 increase steering control lever’s 

distance from neutral. The farther forward steering control 
levers are from neutral, the faster the mower will travel 
forward. The farther back steering control levers are from

 

neutral, the faster the mower will go in reverse.     

Never make sudden stops or reverse direction, 
especially when maneuvering on a slope. The 
steering is designed for sensitive response. Rapid 
movement of the control levers in either direction 
could result in a reaction of the mower that can 
cause serious injury. 

WARNI

N

G

When moving in the rearward direction push forward 
gently on steering control levers and avoid sudden 
movement. Any sudden movement could cause the 
front of the mower to come off of the ground 
resulting in possible loss of control, causing serious 
injury or death.

Always be aware of what is behind the machine 
before backing up. Do not mow in reverse unless 
absolutely necessary. Always look down and behind 
before and while backing up.

WAR

N

ING

WA

R

N

IN

G

Содержание Super 104





























































Отзывы:

Нет отзывов