HUSTLER Honda Engine Z, Инструкция по эксплуатации и запасным частям, Страница: 150 / 166

10-30 108602 10/08
A restriction indicator takes the guesswork out of air cleaner servicing and allows you to safely benefit from
the filter’s optimum performance.
General engine maintenance
Detailed instructions and recommendations for break-in and regular maintenance are specified in the
Engine Owner’s manual. Please refer to this manual for engine servicing, lubricating oil levels with quality
and viscosity recommendations, bolt torques, etc. The engine warranty is backed by the manufacturer.
Special attention should be paid to applicable data which will not be duplicated here.
Belt replacement
"FIG. 41", "FIG. 42", "FIG. 43" & "FIG. 44" show diagrams and descriptions of the unit’s belt drive systems.
Inspect these belts frequently for wear and serviceability. Replace a belt that shows signs of severe cuts,
tears, separation, weather checking and cracking, or burns caused by slipping. Slight raveling of belt
covering does not indicate failure, trim ravelings with a sharp knife.
FIG. 40
FIG. 41 FIG. 42
RESET
BUTTON
INDICATOR
1. Pump belt
2. Engine pulley
3. Pump idler pulley
4. Pump idler arm
5. Pump pulley
6. Electric deck clutch
7. Pump idler spring
1
2,6
3
4
5
5
7
VIEWED FROM
BOTTOM OF UNIT
1. Spindle drive belt
2. Deck blade spindle pulley
3. Spindle belt tension idler
4. Spindle belt tension idler spring
(9.0" at operation)
5. Deck belt idler
6. Idler arm
Deck Belt Drive Layout
54" & 66" XR7 DECK
2
5
6
1
3
2
5
4
2