HUSTLER FasTrak SDX Скачать руководство пользователя страница 5

604856

1-1

REV J

GENERAL INFORMATION

This manual applies to the following Hustler

®

 Turf Equip-

ment equipment lines:

Hustler

®

 Raptor

®

 SD

To The New Owner

Hustler

®

 mower owners and operators 

must read

 this man-

ual carefully. It contains operation and maintenance informa-
tion that will help you achieve years of dependable service.

The Engine Owner’s Manual, included in the owner’s 

packet, contains engine information that will not be repeated 
in this manual. 

The 

owner’s responsibilities

 include, but are not limited to, 

making certain that the operators and mechanics:

read and understand the engine owner’s manual 
before attempting to operate or repair the engine.

read and understand the mower’s operator manual and 
all decals before operating this machine.

are qualified and physically able individuals, properly 
trained in the operation and maintenance of this 
equipment. Before they are allowed to operate or 
maintain this machine, they 

must

 be familiar with its 

safe operation, operator controls, and decals.

know they are responsible for their own safety as well 
as the safety of other persons within the vicinity. 

Remember,

 the operator is responsible for accidents 

or hazards occurring to other people or their property.

who cannot read and understand English have this 
material explained to them.

IMPORTANT:  

As the owner/operator you can prevent acci-

dents. You are responsible for accidents or injuries occurring 
to yourself, other people or property.

Never let children or untrained people operate or service 

the equipment. Local regulations may restrict the age of the 
operator.

For more detailed maintenance and adjustment informa-

tion refer to the proper 

General Service Manual

 for your 

machine. Refer to the 

Product Literature

 section of this man-

ual for information on how to obtain this manual.

Using This Manual

This manual contains general operation information as 

well as basic adjustment and maintenance information. 
Since operating conditions vary considerably, all conditions 
cannot be addressed individually. Through training and expe-
rience, operators should develop safe operating practices 
suitable to most conditions.

Directions used in this manual, for example RIGHT or LEFT, 

refer to directions when in the operator position and facing 
forward, unless otherwise stated.

Though current at the time of printing, photographs and 

illustrations shown may vary slightly from your mower due to 
subsequent production changes. Hustler

®

 Turf Equipment, 

Inc. reserves the right to redesign and change the machine 
as deemed necessary, without notification. If a change has 
been made to your machine which is not reflected in this 
manual, contact your Hustler

®

 

Dealer for current information.

Warranty Registration

There are several ways to register the mower with Hustler 

Turf Equipment: 

• Hustler

®

 Dealers must 

register the unit on-line at 

https:/

/dealer.hustlerturf.com

 within 

ten (10) days

 following 

date of purchase. 

• Customer

 may register the unit on-line at 

www.hustler-

turf.com 

or by

 mailing in the Warranty Registration Card,

included in the owner’s packet, within

 ten (10) days 

fol-

lowing date of purchase.

As the new equipment owner, you should confirm that your 

mower has been registered with Hustler

®

 Turf Equipment.

Be sure to register the mower plus each attachment that 

displays a model and serial identification number plate with 
Hustler

®

 Turf Equipment.

IMPORTANT:  

Any unauthorized modification, alteration, 

or use of non-approved attachments voids the warranty and 
releases Hustler

®

 Turf Equipment from any liability arising 

from subsequent use of this equipment. Do not use or oper-
ate any attachment not approved by Hustler

®

 Turf Equip-

ment.

Model and Serial Number

Mower model and serial numbers are found on the serial 

identification plate, located on the left mower frame side rail.

These numbers are required when the unit is registered 

with Hustler

®

 Turf Equipment. They will also assure you of 

the correct service parts when replacement becomes neces-
sary.

 

Parts and Service

Use only original Hustler

®

 replacement parts available from 

your local Hustler

®

 Dealer. For prompt, efficient service, 

always provide the following information when ordering 
parts:

1.

Correct part description.

2.

Correct part number.

3.

Correct model number.

4.

Correct serial number.

All arrangements for warranty repair and service must be 

handled through an authorized Hustler

®

 Dealer. 

Содержание FasTrak SDX










































Отзывы: