HUSTLER FasTrak 36, Руководство пользователя, Страница: 23 / 32

NOTES:
1. Initial oil change is after 5 hours of operation. Thereafter,
change oil after every 40 hours operation. Change more often
under dusty or dirty conditions and during hot weather periods.
2. Torque initially and after first 2 hours of operation.
3. Change engine oil filter per the engine manufacturer’s
recommendations. Refer to Engine Owner’s Manual for
recommendations and other maintenance items.
4. Service more often under dusty or dirty conditions.
5. Pump drive belt only - Inspect every 6 months or 100
hours
and replace if worn or cracking is noticed. Otherwise,
replace every 200 hours or 2 years whichever comes first.
6. Check fuel line hoses, fuel valve and grommet for any cracks
or leaks
7. C-IZT only - Change the filter and oil using 20W50 motor oil.
REFERENCES:
a
— Refer to Engine Owner’s Manual
NOTE:
After completing maintenance cycle (100 hours), repeat cycle.
WEEKLY OR ANNUALLY OR
SERVICE AT 50 100
INTERVALS INDICATED HOURS HOURS
Verify safety start interlock system Prior to each use
Visually inspect unit for loose hardware
and/or damaged parts Prior to each use
Visually inspect tires Prior to each use
Check oil level, engine (1) Prior to each use or every 4 hrs.
Clean air intake screen (4) Prior to each use or every 4 hrs.
Clean foam element (4) Prior to each use or every 4 hrs.
Check fuel level Prior to each use
Blades - sharpen & securely fastened Prior to each use
Discharge chute - securely in place &
in lowest position Prior to each use
Grease deck height pivots x
Grease gauge wheel bearings x
Change engine oil & filter (1) (3) x
Clean cylinder and head fins (a) x
Check battery connections x
Check tire pressure with a gauge x
Clean engine exterior (a) x
Replace air cleaner paper element (4) x
Clean and regap spark plugs (a) x
Check pump and deck belt tension
& condition (5) x
Check fuel and hydraulic lines (6) x
Check fuel valve and grommet (6) x
Tighten lug nuts on wheels (2) x
Change fuel filter x
Replace spark plugs x
Change pump/motor
transmission oil & filter (7) Every 200 hours or 2 years
FasTrak Maintenance Schedule
Refer to Fig. 4-9 & Fig. 4-10
Figure 4-8
Upper
control
lever
Lower control
lever
Cap screw
FasTrak 36/42 shown
23
600643 02/06