HUSTLER FasTrak 36 Скачать руководство пользователя страница 20

Lubrication

Use SAE multi-purpose grease.

Electrical system

The electrical system is a 12-volt, negative ground.  Recommended

battery size is a garden tractor BCI group U1R with 225 or better cranking
AMP rating.  A maintenance-free battery is recommended.  Otherwise,
follow battery manufacturer’s maintenance, safety, storing and charging
specifications. 

WARNING:  

Battery posts, terminals, and related

accessories contain lead and lead compounds, chemicals
known to the State of California to cause cancer and
reproductive harm.  Wash hands after handling.

WARNING:  

Avoid skin and clothing contact with battery

acid.
Always wear eye protection when checking the battery, acid
can cause serious injury to skin and eyes.  If contact occurs,
flush area with clean water and call physician immediately.
Acid will also damage clothing.
Do not drink the battery electrolyte.
Do not allow open flame near the battery when charging.
Hydrogen gas forms inside the battery.  This gas is both toxic
and flammable and may cause an explosion if exposed to
flame.  Always remove the negative ground first and replace
it last.
Do not overfill battery.
Electrolyte may overflow and damage paint, wiring or
structure.  When cleaning the battery, use soap and water.  Be
careful not to get soap and water into the battery.  Clean the
battery terminals with a solution of four parts water and one
part baking soda when they become corroded.

WARNING:  

Shorts caused by battery terminals or metal

tools touching metal tractor components can cause sparks.
Sparks can cause a battery gas explosion which will result in
personal injury.
Prevent the battery terminals from touching any metal tractor
parts when removing or installing the battery.
Do not allow metal tools to short between the battery
terminals and metal tractor parts.

WARNING:  

Incorrect battery cable routing could cause

damage to the tractor and battery cables.  This can cause
sparks which can cause a battery gas explosion which will
result in personal injury.
Always 

disconnect 

the negative (black) battery cable before

disconnecting the positive (red) cable.
Always 

connect

the positive (red) battery cable before

connecting the negative (black) cable.

Hydraulic system

FasTrak 44/52

The Hustler FasTrak 44/52 are equipped with two Hydro-Gear C-IZT

integrated pump/motor transmissions.  Fig. 4-1

FasTraks have a replaceable filter which will require replacement every

200 hours or 2 years whichever comes first.  The required service involves
draining the oil and installing a new filter kit (Hustler p/n 789511).  Fill
with new 20W50 engine oil.

WARNING: 

When washing the mower, direct the spray

away (especially if using a power washer) from the Hydro-
Gear C-IZT transmission’s seals to prevent water intrusion
and to ensure component performance.

FasTrak 36/42

The FasTrak 36/42 is equipped with two Hydro-Gear EZT integrated

pump/motor transmissions.  Fig. 4-2

The EZT integrated pump/motor transmissions are sealed for life and do

not require any scheduled service.  

WARNING: 

When washing the mower, direct the spray

away (especially if using a power washer) from the Hydro-
Gear EZT transmission’s seals to prevent water intrusion and
to ensure component performance.

Fuel system

DANGER: 

Observe usual fuel handling precautions:

Do not smoke while refueling.
Do not fill tank with engine running or while engine is hot.
Clean up any gasoline spills.
Allow engine to cool before storing machine inside a
building.
Keep fuel away from open flame or spark and store machine
away from open flame or spark if there is fuel in the tank.
Use extra caution when handling gasoline and other fuels.
They are flammable and vapors are explosive.  A fire or
explosion from gasoline can burn you and others and can
damage property.
Refuel outdoors preferably, or in well ventilated areas.
Never attempt to start engine when there is a strong odor of
gasoline fumes present.  Locate and correct cause.
Store gasoline in an approved container and keep it out of the
reach of children.  Never buy more than a 30 day supply of
gasoline.
Always place gasoline containers on the ground away from
your vehicle before filling.
Do not fill gasoline containers inside a vehicle or  on a truck
or trailer as interior carpets or plastic truck bed liners may
insulate the container and slow the loss of any static charge.
When practical, remove equipment from the truck or trailer
and refuel the equipment with its wheels on the ground.  If

Figure 4-1

C-IZT integrated

pump/motor

600643  02/06

20

Figure 4-2

EZT integrated

pump/motor

Содержание FasTrak 36

































Отзывы: