HUST CNC H6D-B3, Руководство по эксплуатации

Страница: 77 / 88

HUST CNC H6D-B3 MANUAL
71
a. Move the X-axis some distance and measure it if correct
；
If not, please change
the resolution.
b. Y-axis is mainly for checking the MOPM(Machine Opening Position
Module). After traveling some distance, check the value of MOPM if the
same with Y-axis’ coordinate. If not, please change the resolution.
If there is no MOPM, please measure the act. ( Step 3 EX 1 )
(6) Revise the X(L)-axis coordinate
：
a. Move the X-axis to the proper position for measuring easily.
b. In the condition that Basic parameter cipher code has been solved, there will
be the
『
correct
』
function key.
c. Get in the correction displaying page and input actual measuring value.
d. Press
『
ENTER
』
key twice quickly. The X-axis coordinate will change to the
default value automatically.
(7) Check if the setting of MOPM(Machine Opening Position Module) is correct
：
Way to ascertain the
『
D-TYPE
』：
Increase the value and the opening will
getting small.
Consult the Step 3 EX 2.
The calculation of Y- opening default = 0
(Parameter page 4)
When the Y(D)-axis has arrived at HOME, the MOPM value = 108.00 and the
Y-Opening default setting = 400.000 (Parameter page 3)
Then let the UP-TOOL go down to the position of STOP POINT slowly. And
measure the distance of machine opening.
400.000-108.000 = 292.000
。
Fig 62
400
108
0
292