U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900 • WWW.HUSSMANN.COM
P/N 3148885_B
12
Complete Application Connections via Provisioning
View the StoreConnect Provisioning Tool Handbook for clarification on this step. This may be able to be
completed on site. If the installation team has access to the provisioning tool, this can be completed on
site. If not, please contact the StoreConnect team for help in this process.
General Information:
• Use the StoreConnect Provisioning Tool to create application connections.
• Use the StoreConnect Provisioning Tool to generate a configuration file via the Site Information page.
• Go to MyStoreConnect website to confirm Controller connectivity by verifying case information
from each of the Controller on site.
StoreConnect Installation Checklist
The following is a standard Verification Test List and steps to complete.
• SC-21
Install SC-21 and verify connectivity over LTE with StoreConnect Admin.
• Provision SC-21 MAC Address / Serial Number
Commit changes
Contact StoreConnect networking support staff
• Connected Refrigeration Controller
Run CAT5 cable and verify connectivity to SC-21
Contact designated the provisioning personnel
• Personnel check Application Connections step in Provisioning for populated
• If designated Provisioning personnel is out of contact, contact StoreConnect networking
support staff
• Finishing
Non-LTE
Site
Plug in store internet cable to WAN port
Check with StoreConnect networking support staff
If connectivity is verified, remove antennae
Optional: If networking is failing by both LTE and Store network,
contact StoreConnect Networking support staff
